Philips sonicare HX9992/42 Mode D'emploi page 15

Pressure Sensor Feedback
Adaptive intensity
Scrubbing Feedback
- Real time feedback:
- Scrubbing Feedback
- Pressure Sensor Feedback
- Personalized recommendations in the app
- Brushing behavior feedback in the app
The SenseIQ icon on the handle will illuminate when the
smart features are active:
- while brushing
- to confirm enabling and disabling of settings
Your Sonicare toothbrush measures the pressure you
apply while brushing to protect your gums and teeth
from damage.
If you apply excess pressure, the handle will change its
vibration and the brushing feedback light will flash
(purple) at the bottom of the handle until you reduce the
pressure.
Note: The Pressure Sensor comes activated with your
product. To deactivate this feature, see 'Activating or
deactivating features'.
Your Sonicare toothbrush is designed with Adaptive
Intensity to protect your gums. If you apply excess
pressure for an extended period of time, your toothbrush
will automatically lower the intensity setting 1 level. You
will experience a brief pause in the pressure feedback
and feel the intensity adjust to the next lower level.
Note: Adaptive Intensity comes activated with your
product. To deactivate this feature, see 'Activating or
deactivating features'.
Note: Every new brushing cycle the intensity will go back
to your pre-selected setting.
Your Sonicare toothbrush measures the motions while
brushing to detect scrubbing behavior (see brushing
instructions for optimal technique). If you regularly scrub
while brushing, the app will recommend that you enable
Scrubbing Feedback.
15
English