Heat Storm HS-6000-GC Guide D'utilisation page 8

Operations & controls
Turn heater ON/OFF
Press the power icon to alternate between on (red)
and off (white)�
Timer
Set the heater run time by tapping on the timer icon
and use the plus and minus icons to change the time (hour
increments)� The time will display on the front of the unit
and the timer icon will illuminate green once set� After the
set run time is over, the heater will automatically turn off�
Setting the temperature
The default temperature for the heater is 70 °F or 21 °C�
Pressing the + or - icons enters temperature setting mode,
where the thermostat can be adjusted by 1 °F or
1 °C� The display exits this mode after 5 seconds of
inactivity, showing the current ambient temperature�
NOTE: After the heater function or power is turned off, the blower will
continues for several minutes to cool internal components.
Selecting Celsius & Farenheit
Press and hold the + and - icons simultaniously for 3
seconds to switch between Celsius and Fahrenheit�
NOTE: Switching between Celsius and Fahrenheit can only be
performed using the control panel of the heater, and is not available
using the remote control.
8