Publicité
Les langues disponibles
Les langues disponibles
Installation instructions
Installation should be carried out by a certified electrician or a
person possessing the required expertise� Ensure that the heater is
installed correctly before activating the power�
NOTE: Designed for supplemental heating in spaces from 1000 to 1800 square feet.
HEATER LOCATION
Choose a location to mount the heater following the general
instructions provided and avoid direct sunlight� It is not
recommended to move a heater while it is operating� Turn off the
heater, wait for the fan to stop completely, and then relocate�
DO NOT USE in the following areas:
•
Locations with gasoline, paint, or flammable liquids/vapors.
•
Near a bathtub, shower, or swimming pool�
•
Outdoors - use Heat Storm Outdoor Infrared Heaters�
Vaulted or cathedral ceilings
The heater can be used with vaulted or cathedral ceilings� However,
initial room heating may take longer� Once the desired temperature
is reached, the heater will cycle accordingly�
Poorly insulated areas
Note that rooms with poor insulation may not retain heat efficiently,
potentially leading to longer or more frequent operation�
Cold climate installation note
Placing the unit under a window or on a poorly insulated wall may
result in the heater reading a colder ambient temperature than the
actual room temperature� Try connecting the Heat Storm External
Thermostat for a more precise room reading�
TOOLS NEEDED FOR INSTALLATION
•
3/16" drill bit
•
Philips screwdriver
Missing parts? Email us at cs@heatstorm.com
4
Publicité
