Publicité
Les langues disponibles
Les langues disponibles
Attach the carrying handles (15) to the front legs using 2
hex screws, 2 plate washers, 2 spring washers and 2 nuts
for each handle.
Screw the front guide rail to the front of the appliance using
4 hex screws, 4 plate washers, 4 spring washers and 4 nuts.
1. Insert 4 hex screws into the slot of the front guide rail;
2. Install the front guide rail on the front of the appliance
by inserting the screws into the holes;
3. Install plate washers, spring washers, nuts and tighten
them;
Screw the side guide rail to the side of the appliance using
3 hex screws, 3 plate washers, 3 spring washers and 3 nuts.
4. Insert 3 hex screws into the slot of the side guide rail;
5. Place the side guide rail on the side of the appliance by
inserting the screws into the holes;
6. Install plate washers, spring washers, nuts and tighten
them.
Screw the ON/OFF switch (11) and power plug into the right
front leg, using two screws.
Miter gauge
guide rail
Front guide
rail
Side guide
rail
Publicité
