Publicité
Les langues disponibles
Les langues disponibles
• Keep cutting tools sharp and clean . Properly maintained
cutting tools with sharp cutting edges are less likely to
bind and are easier to control .
• Use the power tool, accessories and tool bits etc . in
accordance with these instructions, taking into account
the working conditions and the work to be performed .
Use of the power tool for operations different from
those intended could result in a hazardous situation .
Service
Have your power tool serviced by a qualified repair person
using only identical replacement parts . This will ensure
that the safety of the power tool is maintained .
SAFETY WARNINGS FOR SANDER
• Use the machine only for dry sanding . Penetration of
water into the machine increases the risk of an electric
shock .
• Caution, fire hazard! Avoid overheating the object being
sanded as well as the sander . Always empty the dust col-
lector before taking breaks . In unfavourable conditions,
e . g ., when sparks emit from sanding metals, sanding de-
bris in the dust bag, micro filter or paper sack (or in the
filter sack or filter of the vacuum cleaner) can self-ignite .
Particularly when mixed with remainders of varnish,
polyurethane or other chemical materials and when the
sanding debris is hot after long periods of working .
• Secure the workpiece . A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand .
• Keep your workplace clean . Blends of materials are
particularly dangerous . Dust from light alloys can burn
or explode .
• Never use the machine with a damaged cable . Do not
touch the damaged cable and pull the mains plug when
the cable is damaged while working . Damaged cables
increase the risk of an electric shock .
MAINTENANCE AND CLEANING
Make sure that the machine is not live when carry-
ing out maintenance work on the motor .
• Regularly clean the machine housing with a soft cloth,
preferably after each use . Keep the ventilation slots free
from dust and dirt .If the dirt does not come off use a soft
cloth moistened with soapy water . Never use solvents
such as petrol, alcohol, ammonia water, etc . These sol-
vents may damage the plastic parts .
• The machine requires no additional lubrication .
• Should a fault occur, e .g . after wear of a part, please
contact your local BORT GLOBAL LIMITED dealer .
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resources
and protecting the environment by returning this
appliance to the collection centres (if available) .
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging . Most of
the packaging materials can be recycled . Take these ma-
terials to the appropriate recycling locations . Take your
unwanted machines to your local BORT GLOBAL LIMITED
dealer . Here they will be disposed of in an environmentally
safe way .
Noise/Vibration Information
Measured in accordance with EN 60745-2-11 the sound
pressure level of this tool is 87,4 dB(A) and the sound
power level is 98,4 dB(A) (standard deviation: 3 dB), and
the vibration is 3,7 m/s
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards or standard-
ized documents: EN 60745-1, EN 61029-2-3, EN 55014-1,
EN 55014-2, EN 61000-3-2, EN 61000-3-3, in accordance
with the regulations 2006/42/EC, 2006/95/EC, 2004/108/
EC, 2011/65/EU .
9
(hand-arm method) .
2
Publicité
