Firmware Updates - Panasonic Technics SU-G700 Mode D'emploi

Firmware updates

"F/W Update"
Occasionally, Panasonic may release updated
firmware for this unit that may add or improve
the way a feature operates. These updates are
available free of charge.
• For the update information, refer to the
following website.
www.technics.com/support/firmware/
Downloading takes approx. 3 minutes.
Do not disconnect the AC mains lead or
turn this unit to standby while updating.
Do not disconnect the USB flash memory
while updating.
• The progress is displayed as "Updating
while updating. (" " stands for a number.)
Note
• During the update process, no other operations
can be performed.
• If there are no updates, "Firmware is Up To
Date" is displayed. (No need to update it.)
• Updating the firmware may reset the settings
of this unit.
■
Preparation
• Download the latest firmware on the USB flash
memory. For details, refer to the following
website.
www.technics.com/support/firmware/
1 Connect the USB flash memory with
new firmware.
%"
2 Press [AMP].
3 Press [SETUP].
4 Press [ ], [ ] repeatedly to select
"F/W Update" and then press [OK].
5 Press [ ], [ ] to select "Yes" and then
press [OK].
• The progress is displayed as "Updating
while updating. (" " stands for a number.)
• When the update has finished successfully,
"Success" is displayed.
6 Disconnect the AC mains lead and USB
flash memory, and reconnect it after 3
minutes.
Note
• Downloading may take longer depending on
the USB flash memory.
• Use a USB flash memory with FAT16 or FAT32
format.
• UPDATE terminal is used only for firmware
updating. Do not connect any USB device
other than the USB flash memory for firmware
updating.
• No USB device can be charged from the
UPDATE terminal of this unit.
Firmware updates
Settings
%"
27
(27)