Table Des Matières; Warnings And Precautions - Amprobe AD105A Mode D'emploi

Contents
Symbols.................................................................................................... 1

Warnings and Precautions ........................................................................ 1

Introduction .............................................................................................. 1
Instrument Familiarization (See Fig. 1) ..................................................... 2
Measuring Procedures .............................................................................. 2
Specifications............................................................................................ 3
Troubleshooting........................................................................................ 4
Battery Replacement ................................................................................. 4
Repair ....................................................................................................... 5
Symbols
B
Battery
T
Double
insulated
F
Direct
Current
Warnings and Precautions
• This instrument is EN61010-1:2001 certified for Installation
Category III (1000 V). It is recommended for use in distribution level
and fixed installations, as well as lesser installations, and not for
primary supply lines, overhead lines and cable systems
• This instrument must not be used on uninsulated conductors at a
voltage greater than 1000 V AC/DC
• Do not exceed the maximum input limits per function (see
specifications), nor any ratings marked on the instrument itself
• Never ground yourself when taking measurements. Do not touch
exposed metal pipes, outlets, fixtures, etc., which might be at
ground potential. Keep your body isolated from ground and never
touch exposed wiring, connections, or any live circuit conductors
• Do not operate the instrument in an explosive atmosphere
(flammable gases, fumes, vapor, dust)
• Do not use this or any piece of test equipment without proper
training
Introduction
Your shipping carton should include the digital clamp meter, a carrying
case, one 9 V battery (installed), a warranty card and this manual. If any of
the items are damaged or missing, immediately return the complete
package to the place of purchase for an exchange.
Digital Clamp-On Meter
W
Refer to the manual
B
Alternating Current
P
Complies with EU
directives
1