Senco DURASPIN DS342-AC Mode D'emploi page 3

The following signal words and meanings are intended to explain the levels of risk associated
SYMBOL SIGNAL
DANGer:
wArNiNG:
CAutioN:
NOTICE:
Some of the following symbols may be used on this product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the product in a better, safer manner.
SyMbol NAMe
Safety Alert
Read Operator's
Manual
Eye Protection
Wet Conditions
Alert
No Hands
v Volts
min Minutes
Direct Current
Alternating
Current
n o
No Load Speed
.../min Per Minute
SyMbolS
with this product.
MEANING
Indicates a hazardous situation, which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates a hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) indicates information considered im-
portant, but not related to a potential injury (e.g. messages relating
to property damage).
DeSiGNAtioN/eXPlANAtioN
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand opera-
tor's manual before using this product.
Always wear eye protection with side shields marked to comply with
ANSI Z87.1.
Do not expose to rain or use in damp locations.
Failure to keep your hands away from blade will result in serious
personal injury.
Voltage
Time
Type or characteristic of current
Type or characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits, etc. per minute
3