Quax HAVANA 54 03 26PE Serie Manuel page 23

HAVANA
54 03 26PExx
Step 2 : Use the base EB2, one connector C and two eccentrics B
Push the eccentrics (B) into the holes at the bottom of the base (EB2). Tighten the connector (C) in the
middle drilling on top of the base panel.
Step 3 : Use the back EB3, two wooden dowels A and three eccentrics B
Push the eccentrics (B) into the provided drillings on the outside of the back (EB3). Push the wooden do-
wels (A) into the holes at the bottom of the back.
Step 4 : Use the assembled parts AB1 (L and R) and AB3
Push the sides (AB1 L and R) with their connector in the drillings of the back (AB3) and tighten the ec-
centrics.
Luierextensie
Wickelansatz
Plan à langer
Changing extension
Quax Quax
First dreams First dreams
® ®
First steps First steps
23