en-us Before using for the first time
Notes
¡ Dispose of spent water filters
according to local regulations.
¡ Always store replacement water
filters in a cool and dry place in their
original sealed packaging.
Tips
¡ You should also change your water
filter for sanitation reasons.
¡ With a water filter you need to
descale your appliance less
frequently.
¡ If you use a water filter, your coffee
will be more flavorful.
¡ If your appliance has not been used
for a long time, for example if you
were on vacation, you should rinse
the water filter before use by
dispensing a cup of hot water.
¡ The water filter can be purchased
from retailers or customer service.
→ "Accessories", Page 12
6.5 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for initial start-up. Initial start-up
appears when switching on for the first
time or after resetting to the factory
settings.
Press
to switch the appliance on.
1.
Follow the instructions on the
2.
display.
a The display will guide you through
the cycle.
18
Notes
¡ If you want to set up Home Connect
now, follow the instructions in the
Home Connect app.
→ "Setting up Home Connect",
Page 23
¡ If "Demo mode" is selected, only the
display screens will work. You
cannot dispense a beverage or run
a cycle.
6.6 General instructions
Please bear this information in mind so
that you can get the best out of your
appliance.
Notes
¡ The appliance has been
programmed at the factory with
standard settings for optimum
operation.
¡ The grinder has been factory-set for
optimum operation. If coffee is only
dispensed drop by drop or is too
thin and with too little crema, you
can adjust the grinding level when
the grinder is running.
→ "Setting the grinding level",
Page 21
¡ During operation water droplets may
form at the ventilation slits and on
the lid of the tablet compartment.
¡ If you do not perform any actions on
the appliance for a certain period, it
will automatically switch off. You
can change the duration in the basic
settings. → Page 25