Publicité
Les langues disponibles
Les langues disponibles
en-us Before using for the first time
Clean the components with
12.
dishwashing detergent and a soft
cloth.
Rinse all components with clean
‒
water and dry.
Assemble the components of the
13.
milk system.
Insert the milk system in the cover
14.
of the beverage dispenser.
16
Hook in the cover of the beverage
15.
dispenser at the bottom and snap it
in at the top.
Connect a carton of milk to the milk
16.
inlet tube and the suction pipe.
Note: Fill the water tank with fresh,
cold, non-carbonated drinking water
every day.
Tip: To keep the coffee beans at their
best, store them in a sealed container
in a cool place.
You can keep the coffee beans in the
bean container for several days
without them losing their aroma.
6.2 Checking the water hard-
ness
It is important to set the right water
hardness so your appliance indicates
in good time that it needs descaling.
You can use the enclosed test strip to
check the water hardness or ask your
local water company.
Briefly dip the test strip in fresh tap
1.
water.
Allow the water to drain off the test
2.
strip.
Publicité
