Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
This section contains important information about fault identification and rectification.
WARNING
Observe the following safety information to avoid hazards and property damage:
►
Repairs to electrical appliances should only be carried out by specialists trained
by the manufacturer. Improper repairs can cause considerable risks to users
and damage to the appliance.
Fault causes and rectification
The following table will help you to identify and rectify minor malfunctions:
Malfunction Possible cause
The appliance
will not switch
on.
The appliance
switches itself
off automati-
cally.
NOTE
►
If you are unable to resolve the problem by taking any of the aforementioned
steps, please contact the Customer Service department.
│
GB │ IE
■
36
The plug is not connected.
The mains power socket is not
supplying power.
The overheating protection has
been triggered.
The selected temperature has
been reached.
Remedy
Put the power plug into the
socket.
Check the house mains fuse.
Allow the appliance to cool
down.
Clean the appliance.
The appliance switches itself
back on automatically as
soon as the room tempera-
ture falls.
Select a higher target tempe-
rature.
SKD 2300 D5
Publicité
