Auriol HG05124A-DCF Instructions D'utilisation Et Consignes De Sécurité page 55

Setting the alarm
Press and hold the ALARM- / SET button
the alarm settings mode. The last alarm setting will appear in place
of the clock, with the hour flashing. The mark
the right of the alarm time.
Set the hour for alarm W (weekday) or S (single) alarm using the
UP button
8
TIP: Press and hold the UP button or the DOWN- /
quickly scan ahead or back.
Press the ALARM-/SET button again to confirm your entry, and he
minutes will start flashing. These can be changed in the same manner.
Activating the alarm
In clock mode press the DOWN- /
the time a bell will appear with 1:
Press the DOWN- /
will disappear. Alarm symbol 2:
DOWN- /
Both alarm symbols will appear:
button a fourth time will deactivate both alarm 1 and alarm 2.
Switching off the alarm
The alarm will sound at the set time and the backlight will switch
on. When not switched off, the alarm will sound for 2 minutes
before stopping automatically.
Press the SNOOZE-/LIGHT field
display will flash
activated: the alarm will sound again after 5 minutes.
Press any button on the keypad to actually shut off the alarm.
or the DOWN- /
button again and the alarm symbol 1
button again will activate alarm 1 and alarm 2.
, indicating the snooze function has been
for 3 seconds to enter
10
button .
9
button . In addition to
9
. Alarm 1 is now activated.
. will appear. Pressing the
. Pressing the DOWN- /
to interrupt the alarm. The clock
2
will appear to
button to
GB/IE 55