Télécharger Imprimer la page

SilverCrest STV 45 D3 Mode D'emploi page 8

Publicité

Les langues disponibles
  • FR

Les langues disponibles

__CPE282343_TowerVentilator_B6.book Seite 6 Donnerstag, 8. Dezember 2016 2:30 14
6.2
Set blower setting
The blower settings are used to select how
fast the appliance circulates air in the room.
The appliance has three blower settings:
- 1, low: press button 6;
- 2, moderate: press button 4;
- 3, high: press button 3.
Press the 7 OFF button to stop the appliance
working.
6.3
Set running time
The appliance has a timer which you can
use to set the desired running time to be-
tween 0 and 120 minutes.
1. Switch on the timer by
turning rotary switch 2
to any time between 0
and 120 minutes. The
power supply is
switched on at the same
time.
2. To switch off the timer, set rotary
switch 2 to OFF.
NOTE: If you want the appliance to operate
continuously, set rotary switch 2 to ON.
6.4
Oscillation function
The appliance has an oscillation function.
This causes the appliance to move to and
fro, distributing the air produced evenly
throughout the room.
1. Switch on the oscillation function by
pressing button for oscillation func-
tion 5.
2. Switch off the oscillation function by
pressing button for oscillation func-
tion 5 again.
6
GB
7. Cleaning
To ensure your appliance gives you lasting
service, you should clean it regularly.
DANGER! Risk of electric
shock!
Remove the mains plug before each
clean.
Never immerse the appliance in water.
Never allow water or cleaning agent to
run into the appliance.
WARNING! Risk of material damage!
Do not use any astringent or abrasive
cleaning agents.
1. Carefully remove major dust deposits
with a vacuum cleaner.
2. Clean the outside of the appliance with
a damp cloth. You could also use a lit-
tle washing-up liquid.
3. Wipe the appliance with a cloth mois-
tened with clear water.
4. Do not use the appliance again until it
has dried completely.
8. Disposal
This product is subject to the
provisions of European Direc-
tive 2012/19/EC. The sym-
bol showing a wheelie bin
crossed through indicates
that the product requires sep-
arate refuse collection in the European Un-
ion. This applies to the product and all
accessories marked with this symbol. Prod-
ucts identified with this symbol may not be
discarded with normal household waste, but
must be taken to a collection point for recy-
cling electric and electronic appliances. Re-
cycling helps to reduce the consumption of
raw materials and protect the environment.

Publicité

loading

Ce manuel est également adapté pour:

282343