Télécharger Imprimer la page

SilverCrest SPPD 20000 A1 Instructions D'utilisation Et Consignes De Sécurité page 34

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 40
to connect your device's type C input to this power bank's
USB type C output
automatically.
In case if the charging process does not begin immediately,
press the ON / OFF button
charging process. The current battery status of the power
bank
is displayed during the charging process by the
6
LED indicator for battery capacity
for battery capacity
seconds.
To end the charging process, disconnect the USB charging
cable from the mobile device and the power bank
power bank will switch OFF after approx. 30 seconds.
Or simply double click with ON / OFF button
power bank and the LED indicator
NOTE:
1. If you use all the USB ports, a voltage of 5 V will output at
the outputs. The maximum output current must not exceed
3.0 A for all outputs. If all USB outputs are used, fast
charge is not possible.
2. If USB type A output 1
another USB port is connected to another device for
charging, the fast charge to USB type A output 1
terminated and switched to normal charge. All devices will
now output at 5 V each.
GB/IE 34
. The charging process will start
2
briefly to begin the
5
9
will switch off after approx. 30
1
is in quick charge mode, and
. The LED indicator
9
5
9
will switch off.
6
. The
. The
will be
1

Publicité

loading

Ce manuel est également adapté pour:

324139 1901