Caloric CVP1030-SS Manuel D'utilisation Et D'installation page 8

Venting Methods
• This range hood is factory set for venting through the roof or wall.
• Vent work can terminate either through the roof or wall. To vent through a wall, a 90°
elbow is needed.
IMPORTANT:
• NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces,
ceiling, attics or garages. All exhaust must be ducted to the outside.
• Use metal/aluminum duct work only.
• Fasten all connections with sheet metal screws and tape all joints with aluminum foil
tape or equivalent.
• Use caulking to seal exterior wall or roof opening around the cap.
Horizontal Wall Venting
Option 1:
Side wall cap
Vertical Roof Venting
Roof cap
Option 2:
Pg 7