Preparation (Continued)
1. Disconnect main electrical supply, prepare and run electrical wiring through ceiling or
wall. Install a power outlet within the reach of the range hood assembly. DO NOT
restore power until installation is complete.
2. Disconnect the power cord and remove the stainless baffle filters as shown on Baffle
Filter Installation diagram below.
3. Set aside the stainless steel baffle filters until the range hood is installed. Once the
range hood has been installed, re-install the baffle filters as per the Baffle Filter
Installation diagram below.
BAFFLE FILTER INSTALLATION
Figure 3
30" Range Hood
36" Range Hood
Severe Injury
Rotating fan can cause severe
injury. Stay clear of fan when
power is present.
Pg 10