Publicité
Les langues disponibles
Les langues disponibles
Header Wall
Header Bracket
Idler Pulley
Garage
Door
HARDWARE SHOWN ACTUAL SIZE
Clevis Pin 5/16" x 1-1/2"
INSTALLATION STEP 3
Attach the Rail to the
Header Bracket
NOTE: (Optional) With an existing Craftsman
installation, you may re-use the old header bracket
with the two plastic spacers included in the hardware
bag. Place the spacers inside the bracket on each
side of the rail, as illustrated.
• Position the opener on the garage floor below the
header bracket. Use packing material as a
protective base. NOTE: If the door spring is in the
way you'll need help. Have someone hold the
opener securely on a temporary support to allow
the rail to clear the spring.
• Position the front rail end within the header bracket
and join with a 5/16"x1-1/2" clevis pin as shown.
• Insert a ring fastener to secure.
Header
Bracket
Mounting
Hole
Existing
Header Bracket
Existing
Clevis Pin
Spacer
Mounting
Hole
Opener Carton or
Temporary
Support
Ring fastener
15
OPTION WITH
EXISTING CRAFTSMAN
INSTALLATION
Publicité
