Publicité
Les langues disponibles
Les langues disponibles
Obtain suitable plugs and screws for your type of wall, with
a minimum load capacity of 40 kg per mounting point (screws and plugs
not supplied).
Place the bracket
on the floor and
against the wall.
Refit the wall bracket by aligning it with
the drilling points A to locate the other
drilling points B.
The other drilling points B indicate
the position of the upper mountings.
Drill the 4 holes and insert plugs.
Use suitable plugs for your type of wall.
Position the wall bracket and screw it in.
MOUNTING THE WALL BRACKETS
MOUNTING THE WALL BRACKETS
HORIZONTAL AND LOW MODELS
HORIZONTAL AND LOW MODELS
Locate the drilling
points A.
The drilling points A
indicate the position
of the upper mountings.
46
Drilling
points A
Drilling
points B
Drilling
points A
Publicité
