Télécharger Imprimer la page

Husqvarna 540i XPG Manuel D'utilisation page 13

Masquer les pouces Voir aussi pour 540i XPG:

Publicité

Les langues disponibles

Les langues disponibles

Battery safety
WARNING:
instructions that follow before you use the
product.
Only use the BLi batteries that we recommend for
your product. Refer to
batteries are software encrypted.
Use the BLi batteries that are rechargeable as a
power supply for the related Husqvarna products
Accessories on page 36 . To prevent
only. Refer to
injury, do not use the battery as a power supply for
other devices.
Risk of electrical shock. Do not connect the battery
terminals to keys, screws or other metal. This can
cause a short circuit of the battery.
Do not use batteries that are non-rechargeable.
Do not put objects into the air slots of the battery.
Keep the battery away from sunlight, heat or open
flame. The battery can cause burns and/or chemical
burns.
Keep the battery away from rain and wet conditions.
Keep the battery away from microwaves and high
pressure.
Do not try to disassemble or break the battery.
Do not let battery acid touch your skin. Battery acid
causes injuries to the skin, corrosion and burns. If
you get battery acid in your eyes, do not rub but
flush with water for minimum 15 minutes. If battery
acid has touched your skin, you must clean the skin
with a large quantity of water and soap. Get medical
aid.
Use the battery in temperatures between -10 °C (14
°F) and 40 °C (104 °F).
Do not clean the battery or the battery charger with
To do a check of the battery and the
water. Refer to
battery holder on page 28 .
Do not use a battery that is damaged or does not
operate correctly.
Keep batteries in storage away from metal objects
such as nails, screws or jewelry.
Keep the battery away from children.
Battery charger safety
WARNING:
instructions that follow before you use the
product.
Risk of electrical shock or short circuit if the safety
instructions are not obeyed.
Use an approved grounded mains socket that is not
damaged.
Do not use other battery chargers than the one
supplied for your product. Only use Husqvarna QC
chargers when you charge Husqvarna replacement
batteries BLi.
1065 - 011 - 06.05.2024
Read the warning
Accessories on page 36 . The
Read the warning
Do not try to disassemble the battery charger.
Do not use a battery charger that is damaged or do
not operate correctly.
Do not lift the battery charger by the power cord. To
disconnect the battery charger from a mains socket,
pull out the plug. Do not pull the power cord.
Keep all cables and extension leads away from
water, oil and sharp edges. Make sure that the cable
is not caught between doors, fences or similar.
Do not use the battery charger near flammable
materials or materials that can cause corrosion.
Make sure that the battery charger is not covered.
Pull out the plug to the battery charger if there is
smoke or fire.
Only charge the battery indoors in a location with
good airflow and away from sunlight. Do not charge
the battery outdoors. Do not charge the battery in
wet conditions.
Only use the battery charger where the temperature
is between 5 °C (41 °F) and 40 °C (104 °F). Use the
charger in an environment which has a good airflow,
dry and free from dust.
Do not put objects into the cooling slots of the
battery charger.
Do not connect the battery charger terminals to
metal objects as this can short circuit the battery
charger.
Use approved wall sockets that are not damaged.
Use only three-wire outdoor extension cords that
have three-prong grounding plugs and grounding
receptacles that accept the appliance's plug.
Safety instructions for maintenance
WARNING:
instructions that follow before you do
maintenance on the product.
Remove the battery before you do maintenance,
other checks or assemble the product.
The operator must only do the maintenance and
servicing shown in this operator's manual. Turn to
your servicing dealer for maintenance and servicing
of a larger extension.
Do not clean the battery or the battery charger with
water. Strong detergent can cause damage to the
plastic.
If you do not do maintenance, it decreases the
life cycle of the product and increases the risk of
accidents.
Special training is necessary for all servicing and
repair work, especially for the safety devices on the
product. If not all checks in this operator's manual
are approved after you have done maintenance, turn
to your servicing dealer. We guarantee that there are
professional repairs and servicing available for your
product.
Only use original spare parts.
Read the warning
13

Publicité

loading

Ce manuel est également adapté pour:

540i xp