Publicité
Les langues disponibles
Les langues disponibles
Personal protective equipment
WARNING:
instructions that follow before you use the
product.
•
Most chainsaw accidents occur when the saw chain
touches the operator. You must use approved
personal protective equipment during operation.
Personal protective equipment does not give you
full protection from injuries but it decreases the
degree of injury if an accident occurs. Speak to your
servicing dealer for recommendations about which
equipment to use.
•
Your clothing must be close-fitting but not limit your
movements. Regularly do a check of the condition of
the personal protective equipment.
•
Use an approved protective helmet.
•
Use approved hearing protection. Long-term
exposure to noise can result in permanent damage
to the hearing.
•
Use approved protective glasses or a face visor
to decrease the risk of injury from thrown objects.
The product can throw objects, such as wood chips,
small pieces of wood and more, at large force. This
can result in serious injury, especially to the eyes.
•
Use gloves with saw protection.
•
Use pants with saw protection.
•
Use boots with saw protection, steel toe-cap and
non-slip sole.
•
Always have a first-aid kit with you.
•
Risk of sparks. Keep fire extinguishing tools and a
shovel near to prevent forest fires.
10
Read the warning
Safety devices on the product
WARNING:
instructions that follow before you use the
product.
•
Do not use a product with safety devices that are
damaged or do not operate correctly.
•
Do a check of the safety devices regularly. Refer to
Maintenance and checks of the safety devices on
the product on page 27 .
•
If the safety devices are damaged or do not operate
correctly, speak to your Husqvarna servicing dealer.
Functions of the user interface (540i XP)
The user interface includes the start/stop button, SavE
button, battery indicator, oil level indicator and the
warning indicator. The warning indicator flashes if the
chain brake is engaged or if there is a risk of overload.
The overload protection temporarily stops the product
and you cannot use the product until the temperature
decreases. If the warning indicator shows a solid light,
speak to your servicing dealer.
For more information about the user interface, refer to
Product overview on page 2 .
Functions of the user interface (540i XPG)
The user interface includes the start/stop button, SavE
button, battery indicator, oil level indicator, indicator for
heat in the handels and the warning indicator. The
warning indicator flashes if the chain brake is engaged
or if there is a risk of overload. The overload protection
temporarily stops the product and you cannot use the
product until the temperature decreases. If the warning
Read the warning
1065 - 011 - 06.05.2024
Publicité
