Ryobi RY408015 Manuel D'utilisation page 13

CENTER LED LIGHTBAR
The center LED lightbar located on the auger housing il-
luminates your path in low light conditions.
SELF-PROPEL PADDLE
Squeezing the self-propel paddle activates the self-propelled
feature.
START BUTTON AND AUGER PADDLE
The start button and auger paddle are located on the control
panel. Depress the start button then engage the auger paddle
to start the motor and auger. Release the auger paddle to
stop the motor.
UNPACKING
This product requires assembly.
„ Carefully remove the product and any accessories from
the box. Make sure that all items listed in the Packing
List are included.
WARNING:
Do not use this product if any parts on the Packing List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
„ Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
„ Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
„ If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Snow Blower
Upper Handle Assembly
Support Pole with Chute Assembly
Combination Wrench
Operator's Manual
WARNING:
To avoid the risk of injury, do not operate without dis-
charge chute in place.
FEATURES
NOTE: The motor and auger will also start if the paddle is
engaged first and the start button is pressed after.
TWO ACTIVE AND TWO STORAGE PORTS
This product has two active battery ports and two storage
ports. To use the unit, there must be two 40V battery packs
in the active ports. For optimal performance, installing two
40V battery packs of 6Ah or greater is recommended.
ASSEMBLY
WARNING:
If any parts are damaged or missing, do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories not recommended for use with this product. Any
such alteration or modification is misuse and could result
in a hazardous condition leading to possible serious
personal injury.
WARNING:
Do not insert battery packs until assembly is complete
and you are ready to use snow blower. Failure to comply
could result in accidental starting and possible serious
personal injury.
WARNING:
To prevent accidental starting, do not make any adjust-
ments or installations with the battery packs inserted.
Accidental starting of the snow blower during assembly
could result in serious personal injury.
NOTICE:
Do not allow the cables connecting the control panel
and chute deflector to become pinched or trapped dur-
ing assembly.
7 — English