Publicité
Les langues disponibles
Les langues disponibles
Gas Connection to Natural Gas
This installation must conform with local codes and ordinances.
In the absence of local codes, installations must conform with
either the National Fuel Gas Code ANSI Z223.1 - latest edition,
or CAN/CGAB149.1 Natural Gas and Propane installation
code.
Copies of the standards listed above may be obtained from:
CSA International
8501 East Pleasant Valley Rd.
Cleveland, Ohio 44131-5575
National Fire Protection Association
One Batterymarch Park
Quincy, Massachusetts 02269
GAS CONVERSIONS
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
Parts supplied
◼
Parts needed
◼
IMPORTANT: Gas conversions must be done by a qualified
installer. Before proceeding with conversion, shut off the gas
supply to the side searing burner.
18
Tools and Parts for Gas Conversion
Natural gas orifices
Natural gas conversion kit Part Number 710-0003. See
"Assistance" section to order. The conversion kit includes:
◼
Natural gas regulator 4" W.C. (marked "Natural Gas
Regulator")
◼
10 ft (3.0 m) Natural gas hose with quick connector
◼
5.9" (150 mm) Natural gas regulator hose
◼
6 mm nut driver
◼
6 mm wrench
◼
Hex key
6mm
Publicité
