CONTINENTAL EDISON CEFRSH1400B Manuel D'utilisation page 22

1. Power on
Plug in the appliance. A BEEP will sound and the display will light
up.After one second, the appliance will return to standby
mode. All lights will be off except
2. Menu selection/Temperature/Time
Plug in the appliance. When the appliance returns to
standby mode. press
time of the Program are 180°C, 15 min respectively.You can
adjust the time and temperature freely by pressing the Time
+/- and Temperature +/- buttons. You can also press any
function icon to cook different food. Then press
appliance will then start the operation.
Every function has its own default time and temperature, as
shown in the table. You may adjust the time and
temperature freely by using the Time +/- and Temperature
+/- buttons.
(1) The temperature control range is 50-200°C. Every click
on the +/- temperature button will increase or decrease
by 10°C. At 200°C, pressing the "+" button will loop the
temperature back to 50°C, At 50°C, pressing the "-
" button will cycle the temperature back to 200°C. While
the temperature is being set, the temperature digital
display will flash on the screen (it will not flash during
operation). After flashing three times, the temperature is
set.
(2) The time range is 1 to 60 minutes. Each press on the +
/ - buttons will increase or decrease the time by 1
minute. At 60 minutes, if you press the "+" button, the
time will cycle back to 1 min. At 01 min, if you press "-",
the temperature will cycle back to 60 min. When the
Using the appliance
. default temperature and default
21
.
, and the