Publicité
Les langues disponibles
Les langues disponibles
holes on the wall using either the mounting
holes
(for mounting on a building corner)
5
or mounting holes
wall) (see Figs. B and C).
Then drill these holes and insert the wall plugs
(see Fig. C). Fix the wall bracket (for straight-
7
wall or corner mounting) in place by inserting
the mounting screws
holes
/
and firmly tightening them. Check
5
6
that the wall bracket is fixed firmly in place.
Slot the spotlight
2
from above (see Fig. D). After installing, check
that the spotlight
2
Positioning the spotlight
Tilt and turn the spotlight
position (see Fig. E). The spotlight
turned by up to 65° horizontally.
Positioning the solar panel
Tilt and turn the solar panel
position (see Fig. E). The solar panel can be
turned by up to 90° horizontally.
Cardinal direction:
Orientation towards the south is optimum. Orientations
with slight deviations towards the west are preferable
to those with slight deviations towards the east.
Operation
The product have four modes. Each mode is selected
by means of the switch
Mode 1 (AUTO):
Press the switch
3
The product will switch to a mode with motion
sensor function only. The product only switch
on when motion sensor detects movement in
darkness. Approx. 30 seconds after the last
movement has been detected, the light will
switch off. LEDs light up at full power in this
mode.
10 GB/IE/NI
(for mounting on straight
6
through the mounting
8
onto the wall bracket
is fitted securely.
to the desired
2
can be
2
to the desired
1
(see Fig. A).
3
one time to activate Mode 1.
Mode 2 (NIGHT LIGHT + AUTO):
Press the switch
The product will keep night light constantly lit
up in darkness. As soon as the motion sensor
detects movement, the product will switch to
motion sensor light, where the LEDs light up at
full power. Approx. 30 seconds after the last
movement has been detected, the product will
return to functioning as a constantly lit up night
light.
4
Mode 3 (50 % ON):
Press the switch
The product will be switched on with a bright-
ness of 50 % in darkness. The motion sensor is
inactive in this mode.
Mode 4 (OFF):
Press the switch
product.
Cleaning and care
Switch off the product before cleaning.
Check the solar panel
that it is not dirty.
Keep the product free of snow and ice in winter.
Clean the product with a lint-free, lightly mois-
tened cloth and a mild cleaning agent.
Troubleshooting
Fault
The product
does not
switch on.
The light
flickers.
again to activate Mode 2.
3
again to activate Mode 3.
3
again to switch off the
3
regularly to ensure
1
Cause
Solution
Press the
The switch
3
switch
is in the OFF
to switch on
mode.
the product
(see section
"Operation").
The rechargea-
Charge the
ble battery is
rechargeable
empty.
battery.
The rechargea-
Charge the
ble battery is
rechargeable
almost empty.
battery.
3
Publicité
