Parkside HG00266A Instructions De Montage Et Consignes De Sécurité page 5

COIL GARDEN HOSE SET
˜ Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
Familiarise yourself with the product before using it
for the first time. In addition, please carefully refer
to the operating instructions and the safety advice
below. Only use the product as instructed and only
for the indicated field of application. Keep these
instructions in a safe place. If you pass the product
on to anyone else, please ensure that you also pass
on all the documentation with it.
˜ Intended use
The spiral hose is intended for irrigation of garden-
and terrace-plants and can be connected with the
tap connector 2 on standard 26.5 mm (G 3/4")
water tap connections with external thread faucets.
˜ Parts description
1 Spiral hose
2 Tap connector
3 Coupling
4 Variable tip
5 Hose Holder
6 Coupling with water stop-function
7 Mounting material
˜ Technical data
Hose :
Max. operating pressure :
Burst pressure:
approx. ø 8 mm /
ø 11 mm
(inner / outer)
6 bar
18 bar
˜ Safety notes
Warning! Read all safety advice and
instructions!
Make yourself familiar with all the operating
instructions and safety advice for the product
before installation. If you pass the product on
to anyone else, please ensure that you also
pass on all the documentation with it.
Turn off water tap before carrying out
installation work.
CAUTION! DANGER OF ELECTRIC
SHOCK! Make sure that no electrical cables
are damaged during installation of the product.
CAUTION! WATER DAMAGE! Make
sure that no water pipes are damaged during
installation of the product. Observe the
operating instructions for your drill.
Check the spiral hose 1 and fittings for
damages prior to each use.
Ensure that no particles of dirt are able to
damage the fittings, block or get inside the
hose.
Ensure that the fittings are firmly seated.
Turn off the water tap after each use and hang
the hose with the variable tip 4 onto the
supplied hose holder 5 .
Caution! Only release the variable tip 4
after it has been hung onto the hose holder 5 .
The spiral hose 1 will automatically return to
its original shape.
The coupling elements are only suitable for
connection to 9.5 mm (3/8") hoses. But system
parts from ordinary hose plug systems may be
connected.
GB/IE/NI 5