Publicité
Les langues disponibles
Les langues disponibles
Tilting adapter BC260/BC260 BLACK
TABLE OF CONTENTS
1.
PACKAGE CONTENTS ______________________ 6
2.
INTRODUCTION _________________________ 6
3.
INTENDED USE __________________________ 6
4.
SPECIFICATIONS _________________________ 6
5.
SAFETY INSTRUCTIONS ____________________ 6
6.
INSTALLATION __________________________ 6
7. I
NSTALLATION __________________________ 7
8.
MAINTENANCE _________________________ 8
9.
WARRANTY ___________________________ 8
10. CONTACT INFORMATION ____________________ 8
1. PACKAGE CONTENTS
1 x Tilt Adapter Left
1 x Tilt Adapter Right
4 x Allen screw M8 x 25
4 x Washer M8
2. INTRODUCTION
Congratulations on choosing the tilting adapter BC260/BC260 BLACK.
This has been produced according to very high standards and has undergone
careful quality control procedures.
Does the caravan have a hinged storage door and does the BC260/BC260
BLACK not extend far enough to open this door completely? The tilting
adapter BC260/BC260 BLACK is the ideal solution! This tilting adapter can
be easily attached between the sliding platform and the bicycle carrier.
This also allows the extended BC260/BC260 BLACK to tilt so that the hinged
caravan storage door can be opened completely. The tilting adapter
BC260/BC260 BLACK0 is very light and is very easy to assemble.
The connection cable with handle makes it possible to operate the tilt
function with one hand, while the other hand tilts the carrier. The caravan
drawbar storage door can now open completely and the drawbar storage is
easily accessible.
Please read this manual very carefully and
familiarize yourself with all safety precautions
before proceeding with the installation and use of
this tilting adapter BC260/BC260 BLACK.
Important! Keep this manual for future reference.
Hand this manual over to the new owner when
selling the tilting adapter BC260 or the caravan!
3. INTENDED USE
The tilting adapter BC260/BC260 BLACK is attached between the BC260/
BC260 BLACK platform and bicycle carrier.
For caravan with hinged storage door and/or in case of sliding range limiting
confl ict between BC260, nose wheel and/or handbrake handle.
4. SPECIFICATIONS
Type:
suitable for BC260 and BC260 BLACK
Weight:
approx. 1,5 kg
Maximum load:
65 kg
6
4 x Spring washer M8
1 x Connection cable with handle
1 x Allen key
1 x Assembly instruction
5. SAFETY INSTRUCTIONS
Read this manual carefully before installing and using the tilting
adapter BC260/BC260 BLACK for the fi rst time. Follow the fi tting
instructions carefully. Failure to follow the instructions can lead to
personal injuries and material damage.
The symbols below represent important points of attention.
PAY ATTENTION! WARNING! CAUTION! SAFETY ABOVE
EVERYTHING! IMPORTANT INFORMATION!!
NOTE: Useful tip. Facilitates the operation or fi tting
of the product or serves for better understanding.
Before starting installing the tilting adapter BC260/BC260 BLACK:
Only use adapters and accessories that are supplied or recommended by the
manufacturer.
Make sure the BC260/BC260 BLACK bicycle carrier is in good condition
without any damage and is free from rust, dirt etc.
Do not remove, change or alter any parts of the BC260/BC260 BLACK bicycle
carrier. Any drilling of holes is not allowed.
Stop work immediately if you are in doubt about the assembly or any
procedures. In doubt, always consult your dealer or one of our technical
people, fi nd the contact details on the last page of this manual.
Do not install or use the tilting adapter BC260 if you are under the
infl uence of drugs, alcohol or medication that could impair your ability to
use the equipment safely.
6. INSTALLATION
Carefully follow the instructions for use with the
instructions contained therein. Failure to follow the
instructions could result in personal injury or mate-
rial damage.
If you are not sure whether you have carried out the installation of the tilting
adapter correctly, ask your dealer or the manufacturer for further informa-
tion. Neither the manufacturer nor suppliers are liable for damage that can
be attributed to improper use or incorrect assembly.
Place the caravan (or only the BC260/BC260 BLACK) on a hard, level surface.
The tilting adapter BC260/BC260 BLACK is easy to mount and comes
complete with mounting material. Remove all parts from the packaging
and arrange them clearly. Check the contents on the basis of the package
contents overview at the front of the manual.
First, remove the bicycle carrier from the sliding platform
First, loosen the 4 Allen screws (1.) using the Allen key supplied and remove
the bolts (2.).
The bicycle carrier part can be removed (3.).
Publicité
