2.
PRODUCT DESCRIPTION
To find out more about your product, consult the online EPREL database.
As defined in Commission Delegated Regulation (EU) 2019/2016, all
information relating to this refrigeration appliance is available on the EPREL
Base (European Product Database for Energy Labeling). This database
enables you to consult the information and technical documentation of your
refrigeration appliance.
You can access the EPREL Database by scanning the QR code on the
energy label of your appliance or by going directly to:
and searching the reference of your refrigeration appliance.
3. INSTALLATION INSTRUCTIONS
This refrigerating appliance is not intended to be used as a built-in appliance.
➢ Transport and installation
▪
Place on level floor and remove the bottom packing, in order to decrease the shock and
noise. The angle between the compartment body and ground should be no more than
45°
▪
Enough space should be left between the freezer and the wall for ventilation.
▪
Place the freezer away from heat source and do not expose to direct sunshine.
▪
Do not install where there is moisture or where it can easily be splashed by water.
▪
Do not place the freezer in environment prone to freezing.
▪
The appliance should not be used in open air and should not be exposed to rain.
1- Glass sliding Door
2- Aluminium Frame
3- Grill for compressor compartment
4- Castors
5- Thermostat knob
19
www.ec.europa.eu