Télécharger Imprimer la page

Frigelux CGB120 Manuel D'utilisation page 15

Publicité

Les langues disponibles

Les langues disponibles

WARNING —Keep ventilation openings, in the appliance enclosure or in the built-in
structure, clear of obstruction.
WARNING — Do not use mechanical devices or other means to accelerate the
defrosting process, other than those recommended by the manufacturer.
WARNING — D o n o t damage the refrigerant circuit.
WARNING — Do not use electrical appliances inside the food storage compartments of
the appliance, unless they are of the type recommended by the manufacturer.
WARNING — The refrigerant and insulation blowing gas are flammable. When
disposing of the appliance, do so only at an authorized waste disposal center. Do not
expose to flame.
Refrigerating fluid (CGB120, CGB160, CGB210, CGB260, CGB120D, CGB160D,
CGB210D, CGB260D)
The refrigerating circuit in the appliance uses refrigerating isobutane (R600a), which is
a highly inflammable natural gas and is therefore dangerous for the environment. When
transporting or installing the appliance, ensure that no element of the refrigerating circuit
is damaged. The refrigerating fluid (R600a) is
Refrigerating fluid (CGB310, CGB310D)
The refrigerating circuit in the appliance uses refrigerating propane (R290a), which is a
highly inflammable natural gas and is therefore dangerous for the environment. When
transporting or installing the appliance, ensure that no element of the refrigerating circuit
is damaged. The refrigerating fluid (R290a) is inflammable.
Caution risk of fire
If the refrigerant circuit should be damaged:
▪ Avoid opening flames and sources of ignition.
▪ Thoroughly ventilate the room in which the appliance is situated.
It is dangerous to alter the specifications or modify this product in any way. Any damage
to the cord may cause a short circuit, fire, and/or electric shock.
Electrical safety
The power cord must not be lengthened.
▪ Make sure that the power plug is not crushed or damaged. A crushed or damaged
power plug may overheat and cause a fire.
▪ Make sure that you can access the main plug of the appliance.
▪ Do not pull the main cable.
▪ If the power plug socket is loose, do not insert the power plug. There is a risk of
electric shock or fire.
▪ The fridge is only applied with power supply of single phase alternating current
of 220~240V/50Hz. If fluctuation of voltage in the district of user is so large that
the voltage exceeds the above scope, for safety sake, be sure to apply A.C.
Automatic voltage regulator of more than 350W to the fridge. The fridge must
employ a special power socket instead of common one with other electric
appliances. Its plug must match the socket with ground wire.
inflammable.
14

Publicité

loading