Publicité
Les langues disponibles
Les langues disponibles
Insert/replace batteries
(Fig. C)
ATTENTION! Observe the
following instructions to
avoid mechanical and elec-
trical damage.
To insert and replace the battery
(2), proceed as shown in Fig. C.
Before using the unit for the first
time, remove the protective strip
after unscrewing the battery com-
partment.
Note: You will need an appro-
priate screwdriver (not included).
Note: Pay attention to the plus/
minus poles of the batteries and
to inserting them correctly. The
batteries must be fully within the
battery holder.
28
GB/IE
Replace the battery when the cor-
responding symbol (1g) appears
on the display.
After a battery change, all stored
values are automatically reset.
Cleaning
Switch off the product before
cleaning. Only wipe clean from
the outside with a dry cleaning
cloth.
IMPORTANT! Never clean with
harsh cleaning agents.
Maintenance
Check the product regularly for
damage and wear. If water leaks,
correct the connections.
Publicité
