Publicité
Les langues disponibles
Les langues disponibles
Safety notes
READ ASSEMBLY INSTRUCTIONS AND OPER-
ATING INSTRUCTIONS BEFORE USE! KEEP THE
ASSEMBLY INSTRUCTIONS AND OPERATING
INSTRUCTIONS IN A SAFE PLACE!
LIFE AND RISK OF ACCIDENTS
FOR INFANTS AND CHILDREN!
Never leave children unsupervised with the
packaging material. The packaging material
poses a suffocation hazard.
When choosing the location,
make sure that the positions of the cassette and
the fixing post are aligned horizontally. Other-
wise the product may warp. This can cause
problems with extension and retraction.
Secure and close the product in extreme
weather conditions e.g. Beaufort wind scale 4.
Make sure that the unit is properly assembled
before use.
Assemble the product on a solid, level surface.
This product is not a toy and should only be
used under adult supervision.
Check the product for damage or wear before
every use.
Never use the product close to an open flame.
We recommend that two people assemble the
product to avoid injury or damage to the product.
Do not let go of the handle after you have re-
leased it from the fixing post. Only release it
when the screen is securely in the cassette.
Carelessly letting go of the handle can cause
damage and/or injury.
Do not to hang any extra loadings on non-
retractable parts!
The product can be damaged if used in frost.
No maintenance work necessary.
Wind resistance class 1 = Beaufort wind scale
4 = 20‒27 Km / h (branches move, loose paper
is lifted from the ground)
Distance between neighboring wall bases:
Distance between neighboring wall bases
the product length is 3m (If awning size is under
3m, only two wall bases
DANGER TO
end of torsion bar
bases
Installation height of wall bases:
As shown in the figure, we recommend making the
awning surface to form an angle of about 80 degrees
with the wall when it is open.
A = The height of the front bar
L = The length of the arm
C =The height of the wall base
According to the height of front line (A), the recom-
mended angle of 80 degrees and the length of the
arm (L), the value of (C) is the minimum value of in-
stallation height of wall bases
Assembly
Notes for drilling
2
while there is no more wall
6
in the minddle of it.):
2
when
2
are availble on each
you want
4
2
.
2
GB/IE
11
Publicité
