Maintenance Schedule; Maintenance - Husqvarna K 770 Dry Cut Manuel D'utilisation

Masquer les pouces Voir aussi pour K 770 Dry Cut:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

To remove dust from the dust bag
Note: Applicable only for dust bags that can be used
again.
WARNING: Put on protective glasses,
gloves and approved respiratory protection.
Do not open the dust bag unless it is in a
garbage bag. Dust can spill into the air when
the operator removes and cleans the dust
bag. Dust can spill out in the air when the
operator removes and cleans the dust bag.
1. Put the dust bag in a garbage bag.
!
2. Open the zipper of the dust bag.

Maintenance schedule

The maintenance schedule shows the neccessary
maintenance of the product. The intervals are calculated
on daily use of the product.
861 - 004 - 27.02.2019
3. Put the dust bag fully into the garbage bag.
4. Hold and shake the dust bag until it is empty.
5. If necessary, wash the empty dust bag according to
local regulations.
To discard the dust bag
Note: Applicable only for dust bags that are discarded
when they are full.
1. Use the ropes at the inlet to seal the dust bag.
2. Discard the dust bag. Refer to local regulations.

Maintenance

127

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

K 770 dry cut oilguard

Table des Matières