Maintenance; General; Maintenance Schedule - Husqvarna K 4000 Cut-n-Break Manuel D'utilisation

General

WARNING! The user must only carry out the maintenance and service work described in this
!
manual. More extensive work must be carried out by an authorized service workshop.
Inspection and/or maintenance should be carried out with the motor switched off and the plug
disconnected.
Wear personal protective equipment. See instructions under the heading "Personal protective
equipment".
The life span or the runtime of the machine can be reduced and the risk of accidents can increase
if machine maintenance is not carried out correctly and if service and/or repairs are not carried
out professionally. If you need further information please contact your nearest service workshop.

Maintenance schedule

In the maintenance schedule you can see which parts of your machine that require maintenance, and with which
intervals it should take place. The intervals are calculated based on daily use of the machine, and may differ depending
on the rate of usage.
Cleaning
Functional inspection
18 - English

MAINTENANCE

Daily Maintenance Weekly maintenance/40 hours
Clean the machine.
Cooling air intake
General inspection Carbon brushes
Water system Drive belt
Power switch*
Power switch lock*
Blade guard*
Cutting blade**
Monthly maintenance
Drive wheel