BGS technic 9086 Manuel D'instructions page 7

SAFETY INFORMATIONS
● Always lubricate the screw threads before using the tool.
● When mounting the wheel hub/bearing unit you must hear a click. The click indicates that the
holding claws of the hub-bearing unit jumped into holding slot of the wheel bearing housing. If
the wheel hub/bearing unit is not fitted properly, the danger exists that the bearing has no firm
hold in the wheel bearing housing. This can lead to accident, serious injury and property
damage
CONTENTS
1 Spindle, high-strength ball-bearing
2 Spindle nut
3 Screws for shells
4 Allen key
72-4 Pressure bolts
85-4 Pressure bolts
TOOL LIST
Bearing Mounting
Size Shell
62 mm 62M
66 mm 66M
72 mm 72M
85 mm 85M
VEHICLE LIST
Audi
Volkswagen
Seat
Seat
Seat
Volkswagen
Volkswagen
Audi
Seat
Skoda
Volkswagen
Volkswagen
Volkswagen
Volkswagen
Volkswagen
Volkswagen
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Removal
Shell
62D
66D
72D
85D
A2 Gen. II, style bearing on rear
Lupo Gen. II, style bearing on rear
Arosa Gen. II, style bearing on rear
Cordoba Gen. II, style bearing on rear
Ibiza Gen. II, style bearing on rear
Polo 6N2 face lift model Mk III
Fox without PAS
A2 with PAS
Ibiza with PAS
Roomster with PAS
Fox with PAS
Polo with PAS
Multivan
T6
Touareg
Transporter
Tel.: 02196 720480
Fax.: 02196 7204820
mail@bgs-technic.de
62M 66M 72M
62D 66D 72D
85-1 72-1
62-3 62-4
72-3 72-5 72-6
85-5 85-6
Mounting Removal
Pressure Pressure Piece
Piece
62-3 62-4
62-3 62-4
72-6 72-5
72-6
85-5
85-6
85M Mounting shells
85D Dismounting shells
Dismounting plates
Pressure pieces
Replace
Notes
562-4: Reversible Piece
562-4: Reversible Piece
adaptor 585-6
used with 585-5
585-5 Reversible bush
Rear 1999-05 62 mm
Rear 1999-05 62 mm
Rear 1999-05 62 mm
Rear 1999-05 62 mm
Rear 1999-05 62 mm
Front 2000-02 66 mm
Front 66 mm
Front 2000- 72 mm
Front 2002- 72 mm
Front 72 mm
Front 2005- 72 mm
Front 2002- 72 mm
Front 85 mm
Front 85 mm
Front 85 mm
Front 85 mm
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed