Publicité
Les langues disponibles
Les langues disponibles
Instructions for installation and use
Transport and storage
The product is shipped on pallets.
After unpacking and checking the consignment according to the pack list, store the components as follows:
Protect untreated timber against
prolonged
direct sunlight
Consequences of incorrect storage:
Timber is a natural product. Differences in colour, knotholes and minor cracks are normal and do not impair
the strength of the elements.
Extreme weather conditions, such as prolonged hot periods, can cause cracks in the timber caused by
shrinkage. These have however no negative effect on the quality of the product, but are a natural
phenomenon. In many cases, these cracks close again when the whether changes. Shrinkage cracks that
are in the direction of the grain of the timber have no effect on the strength of the material.
Packaging
Do not dispose of the packaging through normal household waste! To protect the environment, separate the
paper, cardboard and plastic packaging and dispose of these materials through recycling.
Wood protection
The product is made from untreated timber. The material must therefore be regularly treated with wood
protection. For effective wood protection treatment, please consult a specialist dealer.
The responsibility for proper wood protection lies with the customer.
If the timber is not properly protected, the warranty shall be voided.
Please observe the relevant clauses in our warranty terms and conditions.
If you wish to have your product installed by a weka installation team, ensure that all wood preservation work
is completed prior to the arrival of the team.
Technische Änderungen vorbehalten! Alle Maßangaben sind ca. Maße.
humidity
- Cracks
- Warping and buckling
- Rot and mould growth
Store the timber so that it is protected agains
the elements and ensure adequate ventilation!
7
direct contact with ground
Copyright HRB 3662
Publicité
