Rollei Actioncam S-30 WiFi Mode D'emploi page 7

5 . Fix the tripod slot of the camcorder to the metal screw of the mount 2 respectively .
6 . Adjust those screws to make the camcorder more steady and convenient .
7 . After fixing the camcorder to the mount correctly , you need to choose which way to fix them
to the helmet .
a) Using a strap: Insert a strap into the two ends of the main mount "B", adjust length according to
the helmet's size, and then tie the strap up to your helmet .
b) Using a sticker: Use the side of a sticker paste to the bottom of the main mount "B", and the
other side paste to your helmet .
NOTes:
• It will record no sounds when using the water proof case
• When used underwater, the water proof case with spray or drops is a normal phenomenon.
• Recording at once after using it in water may cause the recording files is blurry.
7