Rollei Actioncam S-30 WiFi Mode D'emploi page 12

Taking still images
1 . Press the MOde button to switch the camcorder to capture mode
2 . Use the screen to view the object that you want to take, press the sHUTTer or the OK button to
capture it .
3 . Press the dOWN button to enter the power save mode, the screen is totally black .
4 . Press the UP button to enter the Wi-Fi connection mode, the detail use refers to Wi-Fi connecting .
5 . Press the MeNU button to set the camcorder in capture mode . (Resolution/ Quality/ Metering/
White balance/ ISO/ Exposure / Sharpness/ Effect/Drive mode/Burst mode/ Date stamp)
driver mode
[Off]: off
[2s] / [10s]: set a delay from the time the shutter button is pressed to the time the image is shot .
driver mode
Take several pictures per shoot
[Off] /[3] /[5]/ [10]
Playback
All recorded videos and images are saved on the Micro SD card, only after insert the Micro SD card
you can view the recorded files .
1 . Press the MOde button to enter the playback mode
2 . Press the UP and dOWN button to view all the files .
3 . When viewing images, press the OK button to start the slide show, press the MeNU button to exit .
3 . When playing video files, press the OK button to start playing, press the UP button to have a
pause, press it again to recover . At last, press the MeNU button to stop the replay .
4 . Press the MeNU button to set the camcorder in playback mode . (Protect/ Delete/ Slide show/
Photo effect/ Rotate/ Resize/ Voice memo)
12
.
.