Publicité
Les langues disponibles
Les langues disponibles
Always wait until the power tool has come to a com-
u
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Do not use HSS saw blades. Such saw blades can easily
u
break.
Do not saw any ferrous metals. Hot chips may ignite the
u
dust extractor.
Wear a dust mask.
u
In case of damage and improper use of the battery, va-
u
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
Do not open the battery. There is a risk of short-circuit-
u
ing.
The battery can be damaged by pointed objects such
u
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
Only use the battery with products from the manufac-
u
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for making straight cuts in wood
with and against the grain and mitre cuts in wood while rest-
ing firmly against the workpiece.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1)
On/off switch
(2)
Lock-off function for On/Off switch
(3)
Button for cutting depth preselection
(4)
Cover for utility hook
(5)
Auxiliary handle
(6)
Spindle lock button
(7)
Worklight
(8)
Base plate
Bosch Power Tools
(9)
Scale for mitre/bevel angles
(10)
Clamping lever for mitre/bevel angle preselection
(11)
Wing bolt for parallel guide (front)
(12)
45° cut mark
(13)
0° cut mark
(14)
Adjusting lever for retracting blade guard
(15)
Retracting blade guard
(16)
Wing bolt for mitre/bevel angle preselection
(17)
Protective guard
(18)
Chip ejector
a)
(19)
Rechargeable battery
(20)
Wing bolt for parallel guide (rear)
(21)
Cutting depth scale
(22)
User interface
(23)
Handle (insulated gripping surface)
a)
(24)
Battery release button
(25)
Saw spindle
(26)
Mounting flange
a)
(27)
Circular saw blade
(28)
Clamping flange
(29)
Clamping bolt with washer
(30)
Hex key
a)
(31)
Utility hook
a)
(32)
Dust/chip box
a)
(33)
Extraction hose
(34)
Groove for Bosch and Mafell guide rail systems
(35)
Groove for Festool and Makita guide rail systems
a)
(36)
Guide rail
a)
(37)
Pair of screw clamps
(38)
Parallel guide
(39)
Mitre/bevel angle scale marking
(40)
Screw for adjusting the mitre/bevel angle scale
marking
(41)
White scale marking on the cutting depth scale for
cutting with a guide rail
(42)
Red scale marking on the cutting depth scale for
cutting without a guide rail
(43)
Stop Control on/off indicator (user interface)
(44)
Stop Control on/off button (user interface)
(45)
Power tool status indicator (user interface)
(46)
Speed preselection button (user interface)
(47)
Speed setting/mode indicator (user interface)
(48)
Temperature indicator (user interface)
(49)
Battery charge indicator (user interface)
(50)
ECO mode indicator (user interface)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
English | 21
1 609 92A 975 | (10.04.2024)
Publicité
