Ribimex PRBAT20 Manuel D'instructions Et D'utilisation page 10

EN – Original instructions
I. Parts List
II. Characteristics
I. PARTS LIST
II. CHARACTERISTICS See Table 1
III. SAFETY INSTRUCTIONS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire
and/or serious injury.
WARNING!
To reduce the risk of injury, read the instruction manual and understand the
machine before use.
WARNING!
When using electric tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury.
Save all warnings and instructions for future reference.
Keep this manual handy so that you may refer to it later whenever any questions arise. Always be
sure to include this manual when selling, lending, or otherwise transferring the ownership of this
product.
Symbols (Explanation of symbols appearing on the tool, if applicable)
Caution! Risk of injury and/or damage and/or deterioration of product in case of
non-compliance to safety requirements.
CE Conformity
Do not dispose of this product with household rubbish.
Dispose of this product in the nearest recycle centre.
Please contact your local authority or local recycle centre for further information
for its safe disposal.
Guaranteed sound power level value is 96 dB.
Wait until all machine components have come to a complete stop before touching
them.
Beware of thrown or flying objects.
Keep all bystanders, especially children and pets, at least 5 metres away from the
operating area.
Beware of sharp blades. Keep all parts of your body (and especially the hands and
feet) outside the cutting area.
Blades continue to rotate after the motor is switched off.
Remove disabling device before performing any maintenance tasks.
Wear personal protective equipment (PPE): ear protection and safety goggles.
Wear protective gloves in appropriate conditions.
Do not expose to weather conditions (such as rain or snow) or to moisture.
Do not use nor leave outdoor during weather conditions (such as rain or snow).
III. Safety instructions
IV. Getting Started
See Fig. 1
V. Operation
VI. Maintenance and Storage
Page 10 / 27