Ribimex PRBAT20 Manuel D'instructions Et D'utilisation page 12

conditions.
• Do not connect the positive and negative terminals with metal objects. Battery could be
short-circuited and resulted in battery damage or fire.
• Recharge only with the charger specified by the manufacturer.
3.3- Special warnings when using this product
• Use suitable personal protective equipment, including safety goggles, earmuffs at all times.
Wear safety gloves in appropriate conditions.
• Wear heavy, long trousers, long sleeves, and sturdy anti-slip footwear. Do not wear short
trousers, sandals, or go barefoot. Avoid wearing clothing that is loose fitting or that has
hanging cords or ties.
• Always be sure of your footing especially on slopes. Keep firm footing and balance. Walk,
never run.
• Use the product across the face of slopes, never up and down. Exercise extreme caution
when changing direction on slopes.
• Do not use the product near drop-offs, ditches, excessively steep slopes, or embankments.
Poor footing could cause a slip and fall accident.
• Never use product while people, especially children, or pets are within 5 metres because of
the danger of objects being thrown by contact with the blade.
• Only operate the product in daylight or in good artificial light.
• Do not operate the product on wet grass or in the rain.
• Do not use the product when there is a risk of lightning.
• Use extra care when approaching blind corners, shrubs, trees, or other objects including
overhanging shrubs, which may block your view.
• Stop the blades if the product has to be tilted for transportation, when crossing surfaces other
than grass and when transporting the product to and from the area to be mowed.
• Never operate the product with defective guards or shields or without safety devices in
place.
• When switching on motor keep feet well away from blades.
• Do not tilt the product when switching on the motor.
• Do not start the product when standing in front of the discharge opening.
• Keep clear of the discharge opening at all times.
• Do not transport the product while the cutting blade is running.
• Objects struck by the lawn mower blade can cause severe injuries to persons. Thoroughly
inspect the area where the product is to be used and remove all rocks, sticks, metal, wire,
bones, toys, or other foreign objects. Remember, string or wire may entangle with the
cutting means.
• Before use, always visually inspect to ensure blades, blade bolts, and cutter assembly are not
worn or damaged.
• The blade on the product is sharp. Use extreme caution and wear heavy-duty gloves when
fitting, replacing, cleaning or checking bolt security.
• Stop the product and remove the battery pack from the machine and make sure that all
moving parts have come to a complete stop:
- when leaving the product unattended.
- before clearing blockages or unclogging chute.
- before checking, cleaning or working on the product.
- after striking a foreign object. Make sure to inspect the product for damage and make
repairs before restarting the product.
• If the product starts to vibrate abnormally:
- inspect for any damages.
- replace or repair any damaged parts.
Page 12 / 27