Husqvarna PG 510 Manuel D'utilisation page 16

3. Remove the wheel chassis from the grinding head.
4. Push the handle on the central hinge and at the
same time fold the top frame forward. The product is
in the lift position.
5. Remove the lock knobs (A) to loosen the support
foot (B).
A
B
16
6. Hold the handlebar to keep the frame stable and lift
the support foot out and up.
7. Hold the handlebar with one hand and push the
handle on the central hinge. This folds the product
into the folded position.
8. Fold the product carefully.
1146 - 001 - 29.04.2019