Publicité
Les langues disponibles
Les langues disponibles
O
CYCLE
STATUS
LIGHTS
iNDICATOR
The Cycle Status Lights shows the progress
of a cycle.
At each stage of the process,
you may notice sounds or
pauses that are different
from traditional
washers.
SENSING
When
the START button
is pressed,
the washer
will first perform
a self-
test on the lid lock mechanism.
You
will hear a click,
the basket
will make
a slight turn, and the lid will unlock
briefly
before
locking
again.
Once the lid has locked
the second
time, the washer
will slowly spin the
dry load to estimate
the load size,
and begin adding
water.
The washer
Sensing
Prewash/Soak
Wash
Rinse
Spin
Cycle Complete
Lid Locked
D
@
will then move the load
briefly,
pause to allow
water
to soak in to the load,
and resume adding
water. This
process
may repeat
until the correct
amount
of water
has been added
for the load.
You may also hear water
flowing
through
the dispenser,
adding
detergent
to the load.
NOTE." The sensing light may also come on during
the
Prewash and Wash
portions
of the cycle. This is normal.
PREWASH/SOAK
Use this option
to add an extra
agitation
and soak time to the
beginning
of any cycle to break
up tough
stains.
Sensing
Prewash/Soak
Wash
Rinse
Spin
Cycle Complete
Lid Locked
RINSE
You will hear sounds similar
to the wash cycle
as the washer
rinses and moves the load.
Fabric
softener
will be added
if the Fabric
Softener
option
was selected.
Some cycles use
spray rinsing.
SPiN
The washer
spins the load at increasing
speeds for proper
water
removal, based on
the selected
cycle and spin speed.
CYCLE COMPLETE
Once the cycle is complete,
this light will
come on. Remove the load promptly
for
best results.
Sensing
Prewash/Soak
Wash
Rinse
Spin
Cycle Complete
Lid Locked
Sensing
Prewash/Soak
Wash
Rinse
Spin
Cycle Complete
Lid Locked
Sensing
Prewash/Soak
Wash
Rinse
Spin
Cycle Complete
Lid Locked
WASH
You will hear the impeller
moving
the
load.
Unlike traditional
washers,
the
load is not covered
with water.
Low-
water
cleaning
means
concentrated
cleaning.
Rather than
diluting
detergent
as done in an
agitator-style
washer,
this washer
delivers
the detergent
directly
to
the soils. The motor sounds
may
change
at different
stages
in the
cycle. The wash time is determined
by
the selected
soil level.
Sensing
Prewash/Soak
Wash
Rinse
Spin
Cycle Complete
Lid Locked
LID LOCKED
To allow
for proper
load
sensing and
spinning,
the lid will lock and the Lid Locked
light will turn on. This light indicates
that the
lid is locked
and cannot
be opened.
If you need to open the lid, press START!
PAUSE/UNLOCK
LID. The lid will unlock
once the washer
movement
has stopped.
This may take several
minutes
if the load was
spinning
at high speed.
Press START/PAUSE/
UNLOCK
LID again
to resume the cycle.
You may also add or remove options
for each
cycle. Not all options
can be used with
all cycles,
and some are preset to work with certain
cycles.
Sensing
Prewash/Soak
Wash
Rinse
Spin
Cycle Complete
Lid Locked
START/PAUSE
UNLOCK
LID
6
Publicité
