Kenmore 2800 010 Serie Guide D'utilisation Et D'entretien page 15

TROUBLESHOOTING
First try the solutions suggested here
for assistance and to possibly avoid a service call.
Jf you experience
Load not rinsed (cont.)
Not using HE detergent or using too
much HE detergent.
Washer not loaded as recommended.
Sand, pet hair, lint, Heavy sand, pet hair, lint, and
etc. on load after detergent or bleach residues may
washing require additional rinsing.
Load is tangling Washer not loaded as recommended.
Not cleaning or Wash load not completely
removing stains covered in water,
Added more water to washer,
Washer not loaded properly.
Not using HE detergent or using too
much HE detergent.
Not using correct cycle for fabric type.
Not using dispensers.
Always measure detergent and follow detergent directions based
on load size and soil level.
The washer is less efficient at rinsing when load is tightly packed.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only,
Use cycle designed for the fabrics being washed.
Add only I or 2 garments after washer has started.
Add a 2nd Rinse to the selected cycle.
See "Using Your Washer" section.
Select a cycle with a slower wash action and spin speed;
however, items will be wetter than those using a higher
speed spin.
Load garments in loose heaps evenly around the basket wall.
Reduce tangling by mixing types of load items. Use the
recommended cycle for the type of garments being washed.
Washer senses load size and adds correct amount of water, This
is normal and necessary for clothes to move.
Added water lifts the laundry off the washplate, resulting in less
effective cleaning.
Washer is less efficient at cleaning when load is tightly packed.
Load garments in loose heaps evenly around the basket wall.
Load with dry items only.
Add only I or 2 garments after washer has started.
The suds from regular detergent can keep washer from
operating correctly,
Use only HE detergent. Be sure to measure correctly,
Always measure detergent and follow manufacturer's directions
based on load size and soil level.
Use a higher soil level cycle option and warmer wash
temperature to improve cleaning.
Use Whites and Heavy Duty cycle for tough cleaning,
Use dispensers to avoid chlorine bleach and fabric softener
staining.
Load dispensers before starting a cycle.
Avoid overfilling.
Do not odd products directly to toad.
Wash like colors together and remove promptly after the cycle
is complete to avoid dye transfer.
It is normal for small amounts of water to remain in dispenser,
Not washing like colors together,
Small amount Normal dispenser operation.
of water still in
dispenser after
cycle
15