Publicité
Les langues disponibles
Les langues disponibles
3. As shown in the figure, gently lift the in-
nermost glass (1) towards "A" and then,
remove it by pulling towards "B".
1
Innermost glass
4. If your product has an inner glass (2),
repeat the same process to detach it
(2).
5. The first step of regrouping the door is
to reassemble the inner glass (2). Place
the bevelled edge of the glass to meet
the bevelled edge of the plastic slot. (If
your product has an inner glass). Inner
glass (2) must be attached to the
plastic slot closest to the innermost
glass (1).
6. While reassembling the innermost glass
(1), pay attention to place the printed
side of the glass on the inner glass. It is
crucial to place the lower corners of the
innermost glass (1) to meet the lower
plastic slots.
7. Push the plastic component towards
the frame until a "click" sound is heard.
7.8 Cleaning the Oven Lamp
In the event that the glass door of the oven
lamp in the cooking area becomes dirty;
clean using dishwashing detergent, warm
water and a soft cloth or sponge and dry
with a dry cloth. In case of oven lamp fail-
ure, you can replace the oven lamp by fol-
lowing the sections that follow.
Replacing the oven lamp
General Warnings
2* Inner glass (it may
not be available for
your product)
EN / 39
• To avoid the risk of electric shock before
replacing the oven lamp, disconnect the
product and wait for the oven to cool.
Hot surfaces may cause burns!
• This oven is powered by an incandes-
cent lamp with less than 40 W, less than
60 mm in height, less than 30 mm in dia-
meter, or a halogen lamp with G9 sock-
ets with less than 60 W power. Lamps
are suitable for operation at temperat-
ures above 300 °C. Oven lamps are avail-
able from Authorised Services or li-
censed technicians. This product con-
tains a G energy class lamp.
• The position of the lamp may differ from
that is shown in the figure.
• The lamp used in this product is not
suitable for use in the lighting of home
rooms. The purpose of this lamp is to
help the user see food products.
• The lamps used in this product must
withstand extreme physical conditions
such as temperatures above 50 °C.
If your oven has a round lamp,
1. Disconnect the product from the elec-
tricity.
2. Remove the glass cover by turning it
counter clockwise.
3. If your oven lamp is type (A) shown in
the figure below, rotate the oven lamp
as shown in the figure and replace it
with a new one. If it is type (B) model,
pull it out as shown in the figure and re-
place it with a new one.
EN
FR
Publicité
