Publicité
Les langues disponibles
Les langues disponibles
6. Do not let go of the oven control knob, keep the oven control knob
pushed in and hold the oven control knob in for 5 seconds after the pilot
light is lit. If needed, repeat steps 4 and 5 if gas range oven is not lit.
7. Once the oven burner is lit, set the oven control knob to the desired
oven temperature. (Fig.16).
1.Make sure and check that ALL knobs are turned to the OFF position
before lighting.
2.Ensure the main gas valve is in the open position.
3.Push and rotate the oven control knob counterclockwise to position.
(Fig.14).
4.Continue to push and hold in the oven control knob for 5 seconds and
rotate the ignition button clockwise repeatedly until burner lights.
Repeat steps 3 and 4 if not lit. Hold in knob for 5 to 10 seconds once
burner is lit. (Fig. 17).
5.Adjust the flame to the desired level by rotating the control knob.
Rev.4.26.24
Fig.16
Fig.17
17
CCD-0008338
Publicité
