DeWalt DCF787 Traduction De La Notice D'instructions Originale page 14

EnGLIsh
BRUSHLESS CORDLESS COMPACT IMPACT DRIVER
DCF787
WARNING: Read all safety warnings, instructions,
illustrations, and specifications in this manual,
including the battery and charger sections provided in
an original tool manual or the separate Batteries and
Chargers manual. Manuals can be obtained by contacting
Customer Service (refer to the back page of this manual).
Technical Data
Voltage
Type
Battery type
No load speed
Impact rate
Max. torque
Tool holder
Weight (without battery pack)
Noise values and/or vibration values (triax vector sum) according to
EN62841-2-2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents impact tightening of fasteners of the maximum
capapcity of the tool. However if the tool is used for different
applications, with different accessories or poorly maintained, the
vibration and/or noise emission may differ. This may significantly
increase the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool is
switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the operator from
the effects of vibration and/or noise such as: maintain the tool
and the accessories, keep the hands warm (relevant for vibration),
organisation of work patterns.
14
EC-Declaration of Conformity
Machinery Directive
Brushless Cordless Compact Impact Driver
DCF787
DCF787
D
V 18
DC Technical Data are in compliance with:
1
2006/42/EC, EN62841‑1:2015+A11:2022,
EN62841‑2‑2:2014+AC:2015.
Li-Ion
These products also comply with Directive 2014/30/EU and
min -1 0–2800
2011/65/EU. For more information, please contact D
min -1 0–3200
the following address or refer to the back of the manual.
Nm 170
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
6.35 mm
kg 0.9
Markus Rompel
dB(A) 92
Vice President of Engineering, PTE‑Europe
dB(A) 100
D
dB(A) 3
65510, Idstein, Germany
30.07.2024
m/s 2 17
m/s 2 2.6
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

which, if not avoided, will result in death or serious injury.

if not avoided, could result in death or serious injury.

if not avoided, may result in minor or moderate injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.


GENERAL POWER TOOL SAFETY WARNINGS

illustrations and specifications provided with this power
tool. Failure to follow all instructions listed below may result in
electric shock, fire and/or serious injury.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.
WALT declares that these products described under
e
WALT, Richard‑Klinger‑Straße 11,
e
WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous situation
WARNING: Indicates a potentially hazardous situation which,
CAUTION: Indicates a potentially hazardous situation which,
Denotes risk of electric shock.
Denotes risk of fire.
WARNING: Read all safety warnings, instructions,
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE.
WALT at
e
WALT.
e