Napoleon NEFLC32H-IOT Manuel D'installation Et D'utilisation page 27

6.4 weather display layout
Date
YYYY.MM.DD
Day of the
Week
Indoor
Temperature
6.5 Napoleon Connectivity important information
1. Napoleon Connectivity requires 2.4GHz Wi-fi.
2. The decoration light button on the control panel is also an indication light used to indicate when the fireplace
Wi-fi communication is enabled. If the button is not illuminated, the Wi-fi connection has been disconnected
or disabled and needs to be reconnected.
3. The fireplace incorporates an additional safety feature which will disable the Wi-Fi communication to the
fireplace if the fireplace senses that the ambient room temperature is 30°C or above. This is to help prevent
any possible risks of over-heating the fireplace and/or other devices in the room. To re-enable the Wi-fi com-
munications, wait until the room temperature has cooled below 30°C, unplug the fireplace for 5 seconds, then
plug it back in. The Wi-fi connection will reconnect within a few seconds.
Current AM / PM
Hour Display
Current
Minute
Indoor Heater
Humidity Status
Thermostat
Set Temp.
Napoleon Connectivity
Night Cloud
Outdoor
Humidity
Outdoor
Temperature
EN
Day / Sun
Wind
Snow
Rain
27
W415-2960 / B / 06.07.22