Napoleon NEFLC32H-IOT Manuel D'installation Et D'utilisation page 23

6.2 using the app
6.2.1 power setting
6.2.2 heat setting
Napoleon Connectivity
Power Setting:
Press to turn the appliance On and Off.
The weather display brightness settings are accessible on this
home page only when the appliance is turned off.
When the unit is turned on, navigate to the "Lights" bottom tab
to change weather display settings.
The heat setting can be selected through the
heat tab on the appliance home page. The
current ambient temperature is displayed on
the temperature tab and updated to reflect
the target temperature when thermostat
Off
Fan Only
Low
High
Thermostat
Heat Setting:
mode is selected.
No heat
Turns on only the fan to circu-
late air without heat
Selects the Low Heater out-
put (750W)
Selects the High Heater out-
put (1500W)
Automatically turns the heater
ON and OFF to regulate the
room temperature to the
desired set temperature
W415-2960 / B / 06.07.22
EN
23