!
WARNING
•
Power supply service must be completed prior to finishing in order to avoid reconstruction.
•
Heat vents and air openings cannot be covered under any circumstances.
5.1
crystal ember installation
1. Carefully place the medium crystal embers into the bottom media tray (Fig. 1).
2. Apply an even layer from side to side.
3. Randomly place the 6 large crystal embers on top of the medium crystal embers (Fig. 2).
5.2
optional birch wood log installation
1. Carefully place birch wood logs on the media tray (Fig. 1).
2. Use the medium and large crystal embers (see "crystal ember installation" section) to fill in spaces between
the birch wood logs (Fig. 2). This will improve the overall look of the appliance.
Ref.
Log Number
A
W135-0768
B
W135-0770
C
W135-0769
Fig. 1
Quantity
2
2
1
A
C
B
A
Fig. 1 (Recommended placement)
5.0 finishing
Fig. 2
B
Fig. 2
19
W415-2960 / B / 06.07.22
EN