Publicité
Les langues disponibles
Les langues disponibles
!
WARNING
•
Ensure the house circuit breakers for the power supply are turned on. When initially connecting the appliance
to a power source, the appliance will beep then remain off until turned on.
Once the appliance has been plugged into a grounded electrical outlet or hard wired to a dedicated 120V power
supply, it is ready to operate.
4.1
operating control panel
The Control Panel is located on the right side of the appliance.
Power
Side Accent
Light Control
Flame Light Control
F° / C° Switch
Heater Control
Heater Lock
Wifi Setup
(See "Adding a Device"
section)
4.0 operating instructions
Turns the appliance on/off.
Controls side accent light.
Settings:
d8 - Cool white & warm white, both 100% brightness
d7 - Cool white & warm white, both 75% brightness
d6 - Cool white & warm white, both 50% brightness
d5 - Cool white & warm white, both 25% brightness
d4 - Warm white with 100% brightness
d3 - Warm white with 50% brightness
d2 - Cool white with 100% brightness
d1 - Cool white with 50% brightness
d0 - Side accent light off
Controls flame.
8 Settings:
F0 - Flame off
F1 - Orange flame
F2 - Yellow flame
F3 - Blue flame
F4 - Yellow / orange flame
F5 - Orange / blue flame
F6 - Yellow / blue flame
F7 - Yellow / orange / blue flame
Changes temperature format from Fahrenheit to Cel-
cius or vice versa. Press and hold the Flame button
for 5 seconds.
Turns the heater and blower on/off.
4 Settings:
H0 - Heater and blower off
bL - Blower on
H1 - Low heat
H2 - High heat
LO - Heater button can be locked or unlocked by
holding the Heater button for 5 seconds.
Press and hold the side accent light button for 10
seconds.
EN
15
W415-2960 / B / 06.07.22
Publicité
